Step 4A Business (4-pair) Wiring
You may choose to wire your location with 4-pair business wiring to be ready for future
communications needs. The materials you will need for this installation are available from your
AT&T representative or authorized dealer.
List of Materials
You will need the following materials:
screwdriver (flathead)
scissors
drill and bits appropriate for your walls
You will also need the following kits, available from your AT&T representative or authorized dealer.
Wiring Installation Kit
Jack panel box
(Number required depends on
number of telephones. You will
need one jack panel box per six
telephones.)
TELEPHONE
LOCATION
WIRING TERMINATION KIT
Jumper cord
8
Wiring run labels
Cable installation tool
Telephone location stickers
(one per telephone)
Modjack-to-modjack adapter
CABLE EXTENSION KIT
(one per telephone more than 10 feet
100-or 200-foot length of cable
(Length depends on distance between
control unit and telephone).
from the control unit)
Modular connecting block
Cable clip