Step 4 Wiring Runs - Lucent Technologies SPIRIT 1224 Controller Customer Installation Instructions Manual

Step 4 Wiring Runs

You may choose to wire your SPIRIT Communications System using either 4-pair business
wiring materials or 2-pair customer convenience wiring materials.
Each "run" from the controller to a telephone location should be numbered and labeled.
Materials for labeling the wiring are included with the controller. Do not skip this important step.
If you choose to wire your system with customer convenience wiring, use the labels provided
to label EACH END of EVERY wiring run. Proceed to page 13.
If you choose to use the 4-pair business wiring materials, the labeling should look like the
following:
Note to installers: The SPIRlT system requires a reversal in the station set wiring. This reversal is in the
telephone (tinsel) cord that is packed with the telephone, so all other station set wiring should be straight.
7