Password - AT&T MERLIN LEGEND Release 2.0 System Programming And Maintenance Manual

System Programming and Maintenance (SPM)

Password

The Password option is used by qualified service personnel to change the
modem connection password. A password is always required to establish a
connection with the built-in modem. The password always consists of five
characters. You can perform remote system programming only if you enter
the password correctly. Note that a default password is set in the factory.
Step
Display
1
SPM Main Menu
Menu: Select Function
Sys Program
Backup
Boards
Print Opts
Monitor
2
Password
Enter Old Password
Instructions
Select Password by pressing [F9]
Maintenance
Restore
Pass-Thru
Password
Language
Type the old password (which does not
appear on the screen as you type it).
If you do not type the old password
correctly, you see Not Equal at the
bottom of the screen. Type the old
password again. If you do not type the old
password correctly in three attempts, you
see Old Password in Use at the
bottom of the screen. The procedure is
terminated. Press
SPM Main Menu.
.
to return to the —
4 1
Password