With A Local Or Remote Modem Connection - AT&T MERLIN LEGEND Release 2.0 System Programming And Maintenance Manual

System Programming and Maintenance (SPM)

With a Local or Remote Modem Connection

The method you use to access SPM by modem depends on whether you are
programming on-site or from a remote location.
If you are on-site, the modem must be connected to an 012 module on the
control unit. To establish a connection to the control unit's internal modem,
dial
10.
If you are at a remote location, do one of the following:
Place a call to the system on a Remote Access line, enter the barrier
code (if required), and dial the code for the internal modem (
Place a voice call to the system on a regular line and ask the operator
to transfer you to the modem (by dialing
tone, switch to data mode.
You can also set up the remote connection in the other direction: place a
voice call from the system to the remote PC running SPM. Then transfer the
call to the modem.
10).
10 ). When you hear answer
Starting SPM
19