Browse - AT&T MERLIN LEGEND Release 2.0 System Programming And Maintenance Manual

System Programming and Maintenance (SPM)
Step
4
module name
Enter slot numbers
(01-17)
nn
Backspace
Exit
5 To assign another module, select another module type and repeat
Steps 3 and 4.
To view types of modules assigned to all slots, press [PgDn] .
When all entries are complete, press [F5] (Exit). The system restarts,
terminating the programming session.

Browse

The Browse option is accessed by pressing [Ctl] - [F8] . It allows you to
browse through reports saved (by using Print Opts) in the reports directory
of the PC's hard disk. When you access Browse, you see a listing of the
contents of the reports directory. To select a report, highlight the desired
filename by using the arrow keys, then press
a report, press [PgDn] . To go back a page, press [PgUp] . To return to the
beginning of a report, press [Home] . To exit from the Browse option, press
[End] .
Display
Delete
Next
Enter
Instructions
To remove the module type from the
specified slot number, press [F8]
(Delete).
To assign the module type to the specified
slot number and assign that same module
type to another slot, press [F9] (Next).
To assign the module type to the specified
slot number and assign a different module
type to another slot, press [F10] (Enter).
. To view the next page of
2 9
Browse