Table 4. Programming Needed After Upgrade To Release 1.1; Table 5. Programming Needed After Upgrade To Release 2.0 - AT&T MERLIN LEGEND Release 2.0 System Programming And Maintenance Manual

System Programming and Maintenance (SPM)
Table 5 lists features added with Release 2.0 of the communications system.
When you upgrade from Release 1.1 to Release 2.0, you must program these
features as the last step (Step 7) of the upgrade procedure above. When you
upgrade from Release 1.0 to Release 2.0, you must program the features
listed in Table 4, then the features listed in Table 5.

Table 4. Programming Needed after Upgrade to Release 1.1

System language
System Programming
Extension language
System Programming
SMDR language
System Programming
Printer language
System Programming

Table 5. Programming Needed after Upgrade to Release 2.0

Primary Rate Interface (PRI)
Sys Program
Sys Program
Sys Program
Sys Program
Sys Program
Sys Program
Sys Program
Sys Program
Sys Program
Sys Program
Sys Program
More
More
More
More
LinesTrunks LS/GS/DS1
LinesTrunks
LS/GS/DS1
LinesTrunks
LS/GS/DS1
LinesTrunks PRI
LinesTrunks PRI
LinesTrunks PRI
LinesTrunks PRI
LinesTrunks PRI
PRI
LinesTrunks
PRI
LinesTrunks
Tables ARS
Upgrading the Communications System
Language SystemLang
Language Extensions
Language SMDR
Language Printer
Type
FrameFormat
Suppression
PhoneNumber
B-ChannlGrp
NumbrToSend
Test TelNum
Protocol
DialPlanRtg
OutgoingTbl
Continued on next page
PRI
59