Spm Main Menu Options - AT&T MERLIN LEGEND Release 2.0 System Programming And Maintenance Manual

System Proaramming and Maintenance (SPM)

SPM Main Menu Options

The SPM Main Menu provides access to system programming and to the
other functions of SPM:
Sys Program
Backup*
Boards*
Print Opts*
Monitor*
Maintenance
Restore*
Pass-Thru*
Password*
Language
* SPM only; not available on the MLX-20L system programming console. To be used
only by qualified service personnel.
8
Introduction to SPM
enables you to program the system.
enables you to make a backup copy of your system
programming and store it on diskette or on hard disk.
shows you which modules (port boards) are in each
slot of the control unit and allows you to assign
boards to slots.
directs reports to the printer or to the PC for storage
on diskette or hard disk.
is restricted to use by your technical support
organization.
is restricted to use by your technical support
organization and qualified technicians.
enables you to restore your system programming from
diskette or hard disk.
(IS-II/III only) allows you to make a remote connection,
via the control unit, to an IS-II/III machine to
administer applications on the IS-II/III machine.
allows you to change the password for remote entry
into the system.
allows you to choose a language (English, French, or
Spanish) for the 7 x 24 console simulation window on
the PC. (There is also a Language selection under
Sys Program for setting the system language.)