AT&T MERLIN LEGEND Release 2.0 Analog Direct-Line Console Operator's Manual page 95

Features
To Program a Park Button
1. Label the button to be programmed as Park.
2. Slide the T/P switch to the P position.
3. Press the button you labeled Park.
4. Dial *86.
5. Slide the T/P switch to the center position.
To Program a Park Button for a
Specific Park Zone
1. Label the line button to be programmed as Park —
(zone).
2. Slide the T/P switch to the P position.
3. Press the button you labeled Park — (zone).
4. Dial *22 and the Park Zone extension.
5. Slide the T/P switch to the center position.
To Use Park and Paging
1. Park the call.
Park
4-46
To park the call at your extension:
Press the programmed Park button, or press
Transfer, dial your extension, and press
Transfer again.