Programming A Feature Button - AT&T MERLIN LEGEND Release 2.0 Analog Direct-Line Console Operator's Manual
Analog direct-line consoles
Hide thumbs
Also See for MERLIN LEGEND Release 2.0 Analog Direct-Line Console:
- Quick reference (9 pages)
Table of Contents
Advertisement
Features
Programming a Feature Button
1. Label the button you want to program as Feature.
2. Slide the T/P switch to the P position.
You hear a tone every 20 seconds to remind you that you are in
programming mode.
3. Press the button you labeled Feature.
4. Dial *20.
5. Return the T/P switch to the center position.
Using a Feature Code
1. Press the programmed
2. Dial the feature code.
Programming a Feature on a Button
1. Remove the clear label cover from the console by
inserting the end of a paper clip in the notch on the
cover.
2. Write the feature name next to the button to be
programmed.
3. Replace the cover.
4. Slide the T/P switch to the P position.
Your telephone rings every 20 seconds to remind you that you are in
programming mode.
Feature
button.
Programming a Feature Button
4-7
- Quick Links:
- Bis-34D Telephone
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MERLIN LEGEND Release 2.0 Analog Direct-Line Console and is the answer not in the manual?