Timer - AT&T MERLIN LEGEND Release 2.0 Analog Direct-Line Console Operator's Manual

Features

Timer

You can use the built-in timer on display consoles to time
calls, meetings, or breaks. When activated, the timer appears
next to the date, counts to 59 minutes and 59 seconds, then
resets to zero and continues counting.
To Use Timer (BIS-22D and BIS-34D -
models)
1. Press Time/Timer.
2. Press Start to reset timer.
The timer is reset to 00:00 and starts counting.
3. When you are finished timing, press Stop.
The timer stops counting.
4. Press Time/Timer to return to call handling.
To Use Timer (MERLIN II
Display Console)
Press the Clock Functions button.
1.
The green light goes on.
Select Timer from display.
2.
Select Start from display.
3.
4. Select Reset from display to reset timer.
Timer resets to 00:00 and starts counting.
Select Stop from display to stop timer.
5.
Select Exit from display.
6.
Press the Clock Functions button to return to call
7.
handling.
The green light goes off.
4-55
Timer