Extend The Network Interface To The Jack Field - AT&T MERLIN 820 Installation Manual

EXTEND THE NETWORK INTERFACE TO THE JACK FIELD

You need the following to extend the network interface to the jack field:
4-line adapter
If you have more than four outside lines, you need two 4-line adapters.
Jack panel box
Green-on-white label sheet
Single-ended 25-pair connectorized cable
The drawing, right, shows a 4-line adapter (Z610A), a 25-pair connectorized
cable, and a jack panel box (Z122C). A drawing of the green-on-white label sheet
appears on page 12. You also need a jacket-stripping tool to slit the jacket on
the 25-pair cable and a cable termination tool to punch the wires down onto
the block(s) on the 4-line adapter(s). Your equipment supplier or technical con-
sultant can help you obtain these items.
4-Line adapter
Jack panel box
25-Pair connectorized cable
9