Setting Up Uucp Software On A Windows Computer - Lucent Technologies CentreVu Release 3 Version 8 External Call History Interface User Manual

Setup Information
Setting Up uucp
Software on a
Windows
Computer
*Windows is a registered trademark of Microsoft, Inc.
CentreVu® CMS R3V8 External Call History Interface
You must provide the uucp software for the receiving computer. During
setup, the site names (which may be identified by other terms such as
node names or host names) must match for configuration on both
machines. For assistance, call the Lucent Technologies National
Customer Care Center at 1-800-242-2121. International customers may
0
contact your local Lucent distributor or representative.
NOTE:
The following steps briefly describe a typical method of setting up uucp
software on a Windows
to machine. Refer to your uucp software documentation for more
information. If the receiving computer is a UNIX machine, refer to your
UNIX documentation.
1. Install the uucp software on the receiving computer by following the
installation instructions for the software.
2. Configure the uucp software by following the configuration
instructions for the software.
3. Reboot the computer to verify that no configuration or startup
procedures conflict.
4. Define the site name for the receiving computer. This must match
the name that was entered on the CentreVu CMS computer for the
call history receiving machine during installation of the feature.
5. Define the Spool directory as C:\uucp.
6. Define the Public directory as C:\uucp\public.
7. Define the UUXQT path as C:\bin.
8. Define the default drive as C:\.
9. Define the receiving port as COM1.
10. Define the name of the CentreVu CMS computer that will be sending
data. This needs to be the same as the node name of the
CentreVu CMS computer. Type uname -n, and press
the CentreVu CMS at the UNIX prompt and run the name.
NOTE:
For the following step, the login ID is nuucp . The password is that
which was created during the feature installation.
*
computer. Specific details will vary from machine
40
on
Return