What To Do If - AEG EDC 6620 Operating Instructions Manual

What to do if ...

Problem
The oven does not heat up
The oven lighting is not op-
erating
The pyrolysis function is
not working ("C1" is shown
in the time display)
The oven door is locked
The following appears in
the time display:
E001
E020 (for normal opera-
tion)
E021
Possible cause
The oven has not been
switched on
The clock has not been set
to the current time
The required settings have
not been set
The ovenís safety cut-out
has been triggered
The house wiring fuse (in
the fuse box) has tripped
The oven light bulb is
faulty
The oven shelf runner has
not been removed.
Appliance is not connected
to the electricity; door lock
is activated
Temperature outside of the
permissible range
Remedy
Switch on the oven
Set the clock to the cur-
rent time
Check the settings
See Oven Safety Cut-out
Check fuse If the fuses trip
several times, please call a
qualified electrician
Replace oven bulb
Remove oven shelf runner
Connect the appliance to
the electrical supply and
wait at least 10 seconds
until the red temperature
pilot light goes out
Please contact customer
service
45