Signal Menu; Switching Mode; Background - Barco ULTRA REALITY 7000 R9002810 Owner's Manual

9. SIGNAL MENU

Overview
•

Switching mode

•

Background

9.1 Switching mode
Switching from one source to another
To minimize undesired effects when switching from one source to another, one can use the Seamless switching mode, beside Seam-
less switching there is a wide choice of several effects which render the source switching transitions more enjoyable.
How to select a switching mode ?
1. Press MENU to activate the Toolbar
2. Press → to select the Signal item
3. Press ↓ to Pull down the Signal menu
4. Use ↑ or ↓ to select Switching mode
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the desired switching mode (image 9-1)
7. Press ENTER
A white bullet shows the active effect.
The next source switching will be done using the selected effect
Image 9-1
9.2 Background
Purpose
If there is no signal connected to the projector, the background will be a logo, a black or a blue screen depending on the background
settings.
How to change the background ?
1. Press MENU to activate the Toolbar
2. Press → to select the Signal item
3. Press ↓ to Pull down the Signal menu
4. Use ↑ or ↓ to select Background
R5976455 BARCO ULTRA REALITY 7000 30062003
9. Signal Menu
63