Show Native Resolution - Barco ULTRA REALITY 7000 R9002810 Owner's Manual

7. Image Menu
Selecting Auto in case of a Video source may shrink the image horizontally
How to change the Aspect ratio ?
1. Press MENU to activate the Toolbar
2. Press → to select Image
3. Press ↓ to Pull down the Image menu (image 7-3)
4. Use ↑ or ↓ to select Aspect ratio
5. Press ENTER to confirm
Image 7-3

7.3 Show native resolution

What can be done ?
The aim here is to always show the resolution of the source independently of the resolution of the LCD panels.
The "show native resolution" function will handle the sources as follows:
Source
Name Ratio
xga
4:3
sxga
5:4
sxga+
4:3
uxga
4:3
Table 7-1
Show native resolution = ON in case of a BARCO ULTRA REALITY 7000 projector
The Full screen representation function on the other hand forces to use the complete native resolution of the
LCD panels,
How to enable the "Show native resolution" function?
1. Press MENU to activate the Toolbar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Show native resolution (image 7-4)
46
Projected image
Resolution Ratio
1024x768 4:3
1280x1024 5:4
1400x1050 4:3
1600x1200 4:3
Resolution Particularities
Reality
1024x768 image centered +side blanked
1280x1024 image centered +side blanked
1400x1050 image centered +side blanked
1600x1200 image centered
R5976455 BARCO ULTRA REALITY 7000 30062003