Table of Contents
Advertisement
12. Installation menu
Image 12-2
A vertical shift above 100% is not recomended in case of high resolution data signals.
12.2 Projector address
What can be done ?
In some cases the projector address must be changed, for example if an unique RCU is used to control 2 or more projectors.
The projector address setting on the projector must match the setting on the RCU.
What can be changed ?
Within the 'Change Projector Address' menu, the following items can be changed
•
Projector address: address defined by the user, may be from 0 to 255
•
Common address : address may be 0 or 1
How to change the projector's RC5 address ?
1. Press MENU to activate the Toolbar
2. Press → to select the Installation
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Projector address (image 12-4)
5. Press ENTER
A dialogbox appears on the screen. (image 12-5, image 12-6)
Image 12-4
80
Lens adjustments
Use
and
for vertical shift
Use
and
for horizontal shift
Presss <enter> for ZOOM/FOCUS
Press <LOGO> or <LENS> for test pattern
Image 12-3
R5976455 BARCO ULTRA REALITY 7000 30062003
Advertisement
Table of Contents
