S-Video Input - Barco ULTRA REALITY 7000 R9002810 Owner's Manual

What can be connected to the Video input?
Composite video signals from a VCR, OFF air signal decoder, etc... No loop through.
How to connect a Video source.
1. Connect the video output of your source to the video input of the projector (slot 3). 1 x BNC or cinch 1.0Vpp ± 3 dB. (image 3-3)
Note: No loop through available.
3
VIDEO S-VIDEO
R G B
Image 3-3
How to select slot 3
1. Key in 3 on the RCU or the local keypad or use the menu
The cinch connector and the BNC connector are internaly connected together.
A video signal can also be connected on the 5 cable input (BNC1)
3.1.5

S-Video input

What can be connected?
Separate Y-luma/C-chroma signals for higher quality playback of Super VHS-signals.
How to connect the S-Video signal.
1. Connect the S-video output of your source to the S-video input of the projector (slot 4)
Pin configuration of the mini DIN plug.
1
2
3
4
How to select slot 4?
1. Key in 4 on the RCU or the local keypad or use the menu (image 3-4)
R5976455 BARCO ULTRA REALITY 7000 30062003
4
SDI 7
SDO
10Base-T
H/C V 2
G/Y B/PB H/C
R/PR
ground luminance
ground chrominance
luminance 1.0Vpp ± 3dB
chrominance 282 mVpp ± 3dB
RC
RS 232 IN RS 232 OUT
9 5 HDSDO 9
V 1 DVI
HDSDI
3. Connections
15