Show Native Resolution - Barco RLM G5i Performer R9010320 Owner's Manual

8. Image Menu
8.4

Show native resolution

Show native resolution overrules the Full Screen Representation function in Display Setup.
Show native resolution is greyed out for video signals.
DMD
Digital Micromirror Device
What can be done
The aim here is to always show the resolution of the source independently of the resolution of the DMD panels.
Image 8-16
When the show native resolution function is in the ON position, the projector handles the source as follows:
Source
Name Ratio
XGA 4:3
SXGA 5:4
SXGA+ 4:3
UXGA 4:3
How to enable the "Show native resolution" function?
1. Press MENU to activate the menu bar.
2. Press → to select the Image item.
3. Press ↓ to pull down the Image menu.
4. Use ↑ or ↓ to select Show native resolution. (image 8-17)
5. Press → to pull down the menu.
70
Projected image
Resolution Ratio
1024x768 4:3
1280x1024 5:4
1400x1050 4:3
1600x1200 4:3
Resolution
1024x768
1280x1024
1400x1050
1600x1200
R5976815 RLM G5I PERFORMER 02/06/2006
normal image projected
part of the image displayed,
image scroll possible
part of the image displayed,
image scroll possible
part of the image displayed,
image scroll possible