Barcomed Driver Tab; Introduction; Using The Barcomed Driver Tab - Barco MGP D5 Dicom Theater Lite Installation & User Manual

BarcoMed Driver Tab

BarcoMed Driver Tab

Introduction

After the BarcoMed Windows display controller driver is installed,
a new Display Properties tab is available for configuring special
features of the BarcoMed display controller.
Languages supported
The BarcoMed Driver Tab supports the following languages:
English (U.S) (default)
Dutch
German
Korean
Japanese
Simplified Chinese
Traditional Chinese
To change between the languages select the correct region via
the Regional Settings Control Panel in your machine's Start >
Settings > Control Panel.

Using the BarcoMed Driver Tab

Please note that you must have logged on to Windows using an
account with administrator privileges in order to use the
BarcoMed Tabs of the Windows Display Control Panel to change
any display settings.
1. Open the "Display Properties Control Panel" by right clicking
on the desktop, then select "Properties".
2. Under Windows 2000 or Windows XP, click on "Settings"
tab. Double click on the rectangle that represents the Barco
display whose settings you wish to change to bring up its
property page. Click on the "BarcoMed Driver" tab (see
figure 21 on page 53).
52 MGP D5 Dicom Theater Lite