Automatic Thread Cutter - Bernina Artista 185 Manual

Automatic thread cutter

Auto thread cut by color change
during embroidery
Hoop adjustment
· hoop adjustment screen appears
· attach the large hoop to the
embroidery module
· insert the embroidery template into
the hoop
· touch check – the machine reads
the hoop position; the needle
should be positioned exactly over
the center point of the template
Save and close
· touch "ok" = close the screen
· touch "esc" = close Setup
· touch "check" in Layout 1 (touch it
longer so that the reference position
is also read)
· the embroidery hoop adjustment is
completed
«Setup»-Menü
· select Auto thread cutter
· screen opens for turning the thread
cutter off/on
Automatic thread cut
· touch "off" and the Automatic
thread cutter is turned off
· touch "on" and the Automatic
thread cutter is turned on
Save and close
· touch "ok" and the alterations will
be saved
· touch "esc" returns to the Setup
menu
030866.51.04_0401_a185_EN
Setup Program
· if it is not, adjust with the arrows
· it is only necessary to adjust the
hoop once – the same setting
changes will apply to all the hoops
71