Forward; Functions In Setup - Bernina Artista 185 Manual

28 Functions
Double needle limitation
· touch one or more times to select
number from 2 to 8
· the numbers represent the distance
between the needles in mm
· the stitch width will be limited
automatically
· this prevents the needles from hit-
ting the presser foot or stitch plate,
avoiding needle breakage
· can be saved in memory
Applications:
· sewing pintucks
· hemming knits
· decorative stitching
Clear All
· clears all settings that were changed except those
that were changed using the Setup program
· returns to default settings
· Settings affected:
Continuous Reverse
Long Stitch
Pattern End
Securing Function
Mirror Image – up/down
Mirror Image – left/right
Pattern Extend
Balance
Stitch Length
Stitch Width
Needle Position
Half Pattern
Double Needle Limitation
Hemstitch Needle Limitation
Needle Stop Position
Motor Speed
Alphabet Size
Monogram Size
Stored Buttonholes
Tension Function

Functions in Setup

The functions below are available in the Setup program
of the artista sewing machine. They are sewing functions
used from the sewing screens; however, they will not
Personal program
· touch symbol
· personal screen appears
Applications:
· quick method to open personal
program
Tension
· will not show up on the function toolbar unless it is
inserted by the user
· can be installed in the Setup program
· touch symbol to access tension screen
· tension changes affect the selected stitch only
· visual change of setting appears on the tension screen
· default setting shown by a fine line
· touch reset to return to basic settings (factory setting or
values selected in Setup)
show up on the toolbar at the lower edge of the screen
unless specifically placed there. For more information,
see pages 62–63.
030866.51.04_0401_a185_EN
Balance
· touch symbol to open balance screen
· correct forwards and reverse stitches
· correct sideways motion stitches
Applications:
· adapting practical and decorative
stitches to various types of
fabrics
· altering decorative stitches for a new
look
· adapting buttonholes to different
fabrics
· adapting sideways motion stitches to
different fabrics
Note:
There are two additional functions,
Tension and Hemstitch Needle
Limitation, available for placement on
the function toolbar (see Functions in
Setup, page 28). These can be placed
on the toolbar using the Setup pro-
gram (see page 63).
Hemstitch (wing) needle limitation
· will not show up on the function
toolbar unless it is inserted by the
user
· can be installed in the Setup
program
· the stitch width is limited auto-
matically
· needle position is limited to center
· prevents the needle from hitting
the presser foot or stitch plate,
avoiding needle breakage
Application:
· hemstitching
· decorative stitching