Presser Feet; Bernina Specialty Presser Feet - Bernina Artista 185 Manual

Presser Feet

Note: The letter "C" after a foot number indicates the
foot is coded or equipped with a sensor for 9mm
stitching. When a stitch is selected with a coded foot
attached to the machine, the preprogrammed width is
1C
Reverse Pattern Foot
Practical and decorative
stitches
4
Zipper foot
Sewing in zippers
20C
Open Embroidery foot
Embroidery, applique,
satin stitch seams, mono-
grams

BERNINA Specialty Presser Feet

The standard selection of presser feet covers most normal sewing requirements but we recommend the use of BERNINA
specialty presser feet for specific sewing tasks such as quilting, heirloom sewing, home decorating, tailoring, etc.
They are available from your BERNINA dealer.
2A
Overlock Foot
Overlock seams,
oversewing seam edges
5
Blind stitch foot
Blind hems
Edge stitching
40C
Sideways motion foot
with code
For all sideways motion
stitches
030866.51.04_0401_a185_EN
9 mm, rather than 5.5 mm. This letter does not always
appear on the foot and in some cases does not appear
on the screen in the presser foot indicator.
3C
Buttonhole Foot
Buttonholes
8
Jeans foot
Straight stitching in thick,
firm fabrics
Presser feet 17
3A
Automatic Buttonhole Foot
Buttonholes in flat
materials
Darning program
18
Button sew-on foot
Sewing on buttons, hooks
and eyes