Screen Calibration; Embroidery Hoop Adjustment - Bernina Artista 185 Manual

70 Setup Program

Screen Calibration

Embroidery hoop adjustment

Calibrating the screen is important
for making on-screen selections by
touch. If the screen is not calibrated,
you may touch one selection and the
machine will read one next to it. For
precision touch selection, the screen
must be calibrated.
Setup menu
· press the external Setup button,
menu appears
· touch Service
Service Screen
· service screen appears
· select screen
· select this screen if the on-screen
buttons do not react properly when
selected (touched)
Calibration
· screen calibration screen appears
· press each black point in the center,
one after the other
· it is not important which point is
selected first
· the machine will beep when the
dots are touched to let you know
contact was made
· will automatically go back to the
previous screen
· touch esc to return to the setup
screen
This adjustment calibrates the needle
to the center of the embroidery hoop.
The hoop adjustment can only be
Setup menu
· press the external Setup button
· menu appears
· touch service
Service Screen
· service screen appears
· select Adjustment of hoop
030866.51.04_0401_a185_EN
Note: The screen is calibrated at the
factory, but shipping and transport-
ing may affect it.
The screen only needs to be cali-
brated if there is a problem with
precision touching.
· touch esc to return to last selected
stitch screen
Important Note:
When calibrating the screen, take
care to touch the black dots only.
If the screen is miscalibrated by
touching any area other than the
black dots, it may require a technical
adjustment by an authorized
technician.
activated if the embroidery module is
attached