Memory Functions - Bernina Artista 185 Manual

44 Memory
Editing memory contents

Memory functions

The following functions become available in the center
of the screen when the edit function of the memory fea-
ture is selected. All functions on the toolbar (except del)
Motor Speed
Balance
Mirror Image –
left/right
Memory
Sub-divider
Stitches with functions
· stitches can be modified after being
programmed into memory
· program the first two stitches
normally
· touch edit
· all available functions appear in the
top right section of the screen
· the last stitch in memory (left of
cursor) appears above the editing
functions
Inserting functions, e.g. mirror image
· place the cursor to the right of the
stitch to which mirror image is to
be applied
· touch edit
· select mirror image in the functions
screen
· the stitch will be shown in mirror
image
Visible functions (in memory bar)
· the securing function appears as a
function in the memory bar
· delete unwanted functions from the
memory bar before continuing with
programming
· touch edit to close
will become inactive when the edit function is selected
and will reactivate when the edit function is closed. For
more information on these functions, see pages 29–30.
Tension
Securing
Function
Letter Size
Mirror Image –
up/down
030866.51.04_0401_a185_EN
· the same procedure for insertion
applies to all functions
· touch edit to close
Note:
Functions such as Long stitch and
Pattern extend can be used with
sideways motion stitches,
however, they will be distorted,
so it is not recommended.
Monogram
Size
Pattern Extend
Long Stitch