Steam Generation System - AEG COMPETENCE B8920 Operating And Installation Instructions

Operating Instructions

Steam Generation System

Important! Wipe the steam generator dry after each use. Soak up wa-
1
ter with a sponge.
Remove any lime residue with water and vinegar.
To prevent the build-up of limescale, use only distilled or softened wa-
ter, for example, from a water filtering appliance.
Important! Chemical de-scaling agents can damage the oven's surface
1
enamel. Always follow the manufacturer's instructions.
Water Drawer and Steam Generator
1. The water and vinegar mixture
(about 200 ml) is not poured di-
rectly into the steam generator, but
into the drawer in the control
panel.
Leave for about 10 minutes in the
steam generator to take effect.
2. Remove the water and vinegar with
a non-abrasive sponge.
3. Rinse the steam generation system
through the water drawer with clear,
softened water (100-200 ml).
4. Soak up remaining water from the steam generator with the sponge,
and wipe dry.
5. Leave the door open to let the oven dry out.
62