What To Do If - AEG COMPETENCE B8340-1 Operating Instructions Manual

What to do if ...

Symptom
The oven does not heat
up.
The oven lighting does
not come on.
Pyroluxe is not func-
tioning ("tEL" appears
in the time display)
The oven door is locked The appliance is not plugged
If you cannot rectify the fault with the help of the information
given above, please contact your specialist dealer or customer
service.
Warning: Repairs to the appliance may only be carried out by qualified
1
specialists. Improper repairs can give rise to significant hazards for the
user.
If the appliance has been used improperly, the customer service engi-
neer's visit or that of the specialist dealer will not be free of charge,
even during the warranty period.
Possible cause
The oven has not been
switched on.
The time has not been set.
The necessary settings have
not been made.
The circuit breaker (at the
household fuse box) has
tripped or the fuse has
blown.
The oven safety cut-out has
been activated.
The oven light bulb has
blown.
The oven shelf runner has
not been removed
in; The door lock has been
activated.
Operating Instructions
Solution
Switch on the oven.
Set the time.
Check the settings.
Check the fuse.
If the circuit breaker trips or
the fuse blows several times,
please call an approved elec-
trician.
See
Safety Cut-out.
Replace the light bulb in the
oven (see Cleaning and Care).
Remove oven shelf runner
Plug in the appliance and
wait at least 10 seconds until
the red temperature pilot
light goes off.
67