Selecting And Quick Editing Presets - E-Mu Xtreme Lead-1 Manual

Selecting and Quick
Editing Presets
26 E-MU Systems
Bank
2
125
To Audition a Preset
Select a preset by turning the data entry control while the cursor is
1.
anywhere on the lower line. The preset number field (shown above) is
the normal position of the cursor and pressing the Enter button will
return the cursor to this position.
Press the Audition button on the front panel. The Audition LED will
2.
illuminate and a short riff will play the selected preset.
Continue to select and audition presets.
3.
Press the Audition button again to turn Audition mode off. The LED
4.
will extinguish.
The first thing you'll do with the Xtreme Lead is select and play the factory
provided presets. Xtreme Lead comes standard with 8 banks containing 128
presets each.
Channel
Number
C01 V127
2
125
Blinking Preset
Cursor Number
The first four banks are USER locations that can be overwritten and used to
store your own presets. The presets that come stored in the USER presets are
duplicated in banks 0-3 of the "Xtreme Lead" ROM bank, so feel free to
overwrite them with your own presets. You won't be losing anything.
The ROM Card identifier is shown in the top right of the display. The preset
is identified in the bottom line of the main screen (the screen that appears
when you first power up the unit).
MSB:007 LSB:2
key: SynhissOrgan
Initial Initial
Volume Pan Arpeggiator
Setting Setting
P01 A:off
R
key: SynhissOrgan
Bank
Preset
Number
Category
Instant Gratification
XLEAD
Preset
Setting
Location
USER
Preset
Name
Setup