Arp Controllers; Master Arpeggiator Parameters - E-Mu Xtreme Lead-1 Manual

Arp Controllers

Master
Arpeggiator
Parameters
The Arpeggiators can be controlled using the front panel real-time
controllers or external MIDI continuous controllers. Controllers are
patched to Arps via the Preset PatchCords located in the Edit menu. See
"Preset Patchcords" on page 159. The following Preset PatchCord destina-
tions control the Arpeggiators.
Arpeggiator Resolution (ArpRes)
This control changes the Arpeggiator Note Value. It adds to the note value
set in the Arpeggiator Note Value screen. See "Note Value" on page 59.
Arpeggiator Extension (ArpExt)
This control changes the Arpeggiator Extension Count. It adds to the
extension count programmed in the Arpeggiator Note Value screen. See
"Extension Count" on page 61.
Arpeggiator Velocity (ArpVel)
This control changes the Arpeggiator Velocity Value. It scales the velocity
value set in the Arpeggiator Note Value screen. See "Velocity" on page 60.
Arpeggiator Gate (ArpGate)
This control changes the Arpeggiator Gate Time. It adds to the gate time set
in the Arpeggiator Gate Time screen. See "Gate Time" on page 60.
Arpeggiator Interval (ArpIntvl)
This control modulates the Arpeggiator Extension Interval. It adds to the
extension programmed in the Arpeggiator Extension Interval screen. See
"Extension Interval" on page 61.
To Access the Master Arpeggiator Parameters
Press the Arpeggiator menu button lighting the LED. The Arpeggiator
1.
menu screen displays the menu page most recently selected since
powering up Xtreme Lead. The cursor appears below the first character
of the screen heading on line one.
Use the right cursor button to advance the cursor to the first field in the
2.
bottom line of the screen.
Now, use the Data Entry Control to access the various Master
3.
Arpeggiator parameters.
Save your Arpeggiator settings using the "Save Setup" function on the
4.
Save/Copy menu.
Arpeggiator/Beats Menu

Master Arpeggiator Parameters

Xtreme Lead-1 Operation Manual 57