Channel Volume - E-Mu Xtreme Lead-1 Manual

Channel Volume

• Select banks independently of the of the preset number by locating the
cursor on the Bank field and turning the Data Entry Control.
USER
USER
USER
USER
XTREME
XTREME
XTREME
XTREME
This chart shows the MSB and LSB numbers needed to select preset banks over MIDI.
Select a bank, then send the program change number. Without a bank select command,
presets are selected from within the current bank.
Channel Volume sets the volume of the selected MIDI channel in relation
to the other channels. This is the same parameter as MIDI volume control
#7, and changes made over MIDI are shown in the display.
Volume
C01
3
079
To Change the Channel Volume
Press either cursor key until the cursor is underneath the volume value.
1.
Rotate the Data Entry Control to select a volume level. The Channel
2.
Volume range is 000-127.
MIDI BANK SELECT
MSB LSB
cc00 cc32
00 00
00 01
00 02
00 03
07 00
07
01
07 02
07 03
V127 P01
R
bts: Logic
Xtreme Lead-1 Operation Manual 39
Basic Operations
Main Screen
Bank 0
Bank 1
Bank 2
Bank 3
Bank 0
Bank 1
Bank 2
Bank 3
A:off USER