E-Mu Xtreme Lead-1 Manual page 29

To Latch BEATS Triggers
The Trigger Keys can be Latched so that pressing once turns a key on and
pressing the key again turns it off.
Press the Arp/Beats button and turn the Data Entry control until the
1.
following screen appears (this is the 3rd screen from the beginning).
BEATS TRIGGER LAYOUT
Part 1
Press either cursor button repeatedly until it is underneath the Part
2.
field.
Rotate the Data Entry Control to select the desired part.
3.
Press either cursor button repeatedly until it is underneath the unlatch/
4.
latch field.
Rotate the Data Entry Control to change the status to "Latch".
5.
Repeat steps 2-5 until Parts 1-16 are latched.
6.
Now play the Trigger Keys and hear the results.
7.
Press the Clear Trigger Key to kill all latched Parts.
8.
Start up a few more triggers and play with the Mute key.
9.
To play BEATS on a different MIDI channel
You can have your cake and eat it too.
BEATS MODE
BtsCh: 01
Press the Arp/Beats button and locate the screen shown above (the 2nd
1.
screen from the beginning).
Set your MIDI keyboard to transmit on channel 2.
1.
Select any "bts:" preset on channel 1 (main screen).
2.
From the main screen, change to channel 2 and select another preset.
3.
The Trigger Keys now play BEATS and the other keys play the preset on
4.
channel 2
Want more?
On channel 2, select a preset with the arp: prefix.
5.
Set the arpeggiator to P (A:P) on the main screen (channel 2).
6.
Now you can play BEATS and arpeggiate. Yeow!
7.
Key: C1 unlatch
Status: P
TrigCh:Basic
Xtreme Lead-1 Operation Manual 29
Setup
Instant Gratification