Table of Contents
Advertisement
DEFINITY INADS
Installation test (all installations)
These tests confirm that the hardware and administration are correct.
1. Place an outgoing call from the INADS port. Check for normal talk path.
2. Place an incoming call to the INADS port. Check for normal talk path.
3. Place an outgoing data from the INADS port to verify connection.
A failure in the link between the remote service center and the TN1648Bs INADS
port can be detected automatically.
1. Type change system-parameters maintenance and press
2. Set the Test Remote Access Port field to y and press
Connectivity for INADS on S8700 and
S8300 media servers
Prior to visiting the customer premises, technicians and/or customer account
teams should retrieve from the auto registration tool (ART) a script for each
server being registered — two for S8700 and one for S8300. Each script contains
the steps that need to be executed to turn on dial out alarming, as well as the RAS
IP address to be administered for each modem.
Once on site, to enable dial out alarming on the S8700/S8300 platforms, use the
sequence of commands exactly as entered in the script. The RAS IP addresses
for the modems should be administered through the "Configure Server" option on
the Web interface.
NOTE:
You must administer the RAS IP address and dial out information on each
server.
Example of an ART script file
productid -p 100003151
almenable -d f
almcall -f 18005353573
NOTE:
RAS IP address: 10.1.1.27.
Enter the IP address through the Web user interface.
For more information, see Installation and Upgrades for the Avaya G700 Media
Gateway controlled by an Avaya S8300 Media Server or an Avaya S8700 Media
Server, 555-234-100.
555-233-116
The product id will be different for each server.
This command enables dial out on the first phone number
administered.
This command administers the phone number.
.
Enter
.
Enter
Issue 4 October 2002
187
Advertisement
Table of Contents
