Table of Contents
Advertisement
Data modules and asynchronous data units
5. Press the NEXT/NO button until you see the CH = correctSetting? or CH -
> correctSetting? prompt. Then press the ENTER/YES button.
Push the button indicated by the arrow ( )
6. When the CONTINUE? prompt appears, press the ENTER/YES button.
7. When the SET CTS LEAD? prompt appears, press the ENTER/YES
button.
Push the button indicated by the arrow ( )
8. Press the NEXT/NO button until you see the CTS = correctValue? or
CTS -> correctValue? prompt. Then press the ENTER/YES button.
Push the button indicated by the arrow ( )
9. When the CONTINUE? prompt appears, press the ENTER/YES button.
10. When the SET DCD LEAD? prompt appears, press the ENTER/YES
button.
Push the button indicated by the arrow ( )
88
Issue 4 October 2002
CH = correctSetting?
SET CTS LEAD?
CTS -> correctValue?
SET DCD LEAD?
DATA
NEXT/NO
BACK ENTER/YES
DATA
NEXT/NO
BACK ENTER/YES
DATA
NEXT/NO
BACK ENTER/YES
DATA
NEXT/NO
BACK ENTER/YES
555-233-116
Advertisement
Table of Contents
