Table of Contents
Advertisement
Terminal server installation
Administering the gateway
NOTE:
If the C-LAN circuit pack and IOLAN+ are in the same subnet, skip this step.
1. Select Admin mode > Password and press
2. Type iolan and press
3. Select gateway to access the Gateway menu
4. Fill in the following fields for Entry 1:
5. Select reboot and press
6. Press the space bar to restart the IOLAN+.
Administering an IOLAN+ port
Use this procedure when connecting an adjunct or serial COM port on a PC
directly (locally) to the IOLAN+ (see
1. Select Admin mode > Password and press
2. Type iolan and press
3. Select port and press
4. Type port number, where port number is the port that the adjunct
connects to, and press
128
Issue 4 October 2002
ENTER
Destination: C-LAN IP address
Gateway: Gateway address
Netmask: Subnet mask
NOTE:
The following steps re-initialize the IOLAN+ so it knows it's connected
to the LAN through your gateway.
ENTER
ENTER
ENTER
ENTER
ENTER
.
.
Figure
23).
ENTER
.
.
to view the Port Setup Menu.
.
.
555-233-116
Advertisement
Table of Contents
