Chapter 18: Mobile Extension Configuration
Mobile Extension Diagram
A simulated physical board (MobileExt board) will be created if an analog trunk or T1/
PRI trunk is configured as a MobileTrunk.
You can configure up to 256 mobile extension ports.
T1, PRI and analog trunks can be shared for regular incoming and outgoing calls and
mobile trunk connections.
Figure 1. Mobile Extension Diagram
Beginning with AltiWare 5.1, an analog trunk can be dedicated to one mobile extension
user. A PRI trunk can only be shared by all mobile extension users.
Setting Up a Mobile Extension
To set up a Mobile Extension Board
1. In the Boards window, double-click a Triton board (PRI board strongly
recommended) to be used as a mobile trunk, then click the Board Configuration
226
AltiWare ACM 5.2 Administration Manual