Placing Calls On Hold - Altigen AltiView Manual

Each time you answer the question Is "710" an area code? the result is
recorded in a text file, AreaPrefix.txt, so that AltiView will not have
to ask you again about that number. If you want to remove the number,
open the file, delete the number, then restart AltiView. The typical address
for the file is: c:\program files\AltiGen\AltiView\AreaPrefix.txt.
Dialing Speed Dial Numbers
To dial Speed Dial numbers, click the button, and then click
the Speed Dial tab:
This tab lists Station Speed Dial numbers that you have configured in
AltiView, and it lists System Speed Dial numbers, if any, that have been set
up for your extension by the system administrator. You can see in the Type
column which numbers are station numbers and which are system numbers.
To call a speed dial number, double-click the row of the number you want
to call, or single-click the row in the Type column.
See "To add or edit station speed dial numbers" on page 61 for details on
setting up speed dial numbers.
Redialing
To redial the last number called, click the Redial button.

Placing Calls on Hold

During a phone call, click the Hold button in the AltiView main window.
The status of the call is changed from connected to a hold state and you will
hear the dial tone.
20 AltiView Manual