Iptalk; Screen Pop, Audio Beep, And Auto Close; Accessing Databases - Altigen AltiView Manual

IPTalk

If you are using IPTalk, Echo Suppression is checked by default.
ToS Byte—The ToS byte indicates the type of service. For IPTalk, you
need high priority service, and the default of "00" set here indicates high
priority service. However, if your company router supports DSCP EF, then
set this field to "A0". The ToS value is AltiGateway-based. For guidance,
see your system administrator. The ToS value is AltiGateway-based.
From the Voice Through drop-down list, choose the sound card that will
carry the incoming and outgoing voice. It could be a sound card in your PC,
or it could be a USB-based sound card in your headset system.
From the Ring Through drop-down list, choose the device that will carry
the incoming ring. When you're away from your desk, you may prefer the
ring to come through your PC speakers, rather than your headset system.

Screen Pop, Audio Beep, and Auto Close

Select the Screen Pop check box if you want an AltiView window to pop
up on your screen when you have a call. You can then click a call to take it
or perform other AltiView actions. For AltiView to pop up, you cannot
have closed the application entirely, but it can be minimized.
Select the Audio Beep check box if you want your PC to beep you when
you have a call.
Select the Auto Close check box to have AltiView close the pop up
window once you have finished with the call.

Accessing Databases

AltiView can access phone numbers from your Microsoft Outlook,
Outlook Express, ACT!, or GoldMine® database. During installation, the
install program reads which applications you have installed on your PC.
In the drop down list under Use Database, select the database you want to
use.
Note: If you select Outlook, AltiWare will load all the subfolders and
data in your main Contacts folder, which will take a few moments.
Once the data is loaded, you can close the Configuration window,
reopen it, and click the Select Folder button that now appears to
choose which Contacts subfolders you want to use.
You also have these additional options:
AltiView Manual 49