Accessing Application Configuration Settings Using Markvision Professional - Lexmark Apps Administrator's Manual

Method two
From the MarkVision Professional Home screen, select Embedded Solutions ‑ Solutions Management from the All
1
Tasks list.
2
Use the Quick Find or Folders tabs to select a device.
Note: When a device managed by MVP is not supported by a specific task, its name will appear with a black line
through it in the Quick Find or Folders tabs. Password-protected network devices are displayed in red. Enter the
device password to gain access to the device.
3
Click Manage Descriptors.
4
Click Add.
5
Browse to find the solution descriptor for the application.
6
Click Open.
Notes:
• The installed solution descriptor appears in the Plug-ins/Solutions on Server box. The solution descriptor
details appear in the Details box.
•
If the descriptor file is not valid, MVP 11.2 will display an error message.
7
Click Close.

Accessing application configuration settings using MarkVision Professional

Note: MarkVision Professional 11.2 or later required.
To configure a solution in MVP:
From the MarkVision Professional Home screen, select Embedded Solutions ‑ Solutions Management from the All
1
Tasks list.
2
Select devices using the Quick Find or Folders tabs.
Use Ctrl + click and Shift + click to select multiple devices.
Note: When a device managed by MVP is not supported by a specific task, its name will appear with a black line
through it in the Quick Find or Folders tabs. Password-protected network devices are displayed in red. Enter the
device password to gain access to the device.
All installed embedded solutions appear.
3
Select the solution to be configured.
4
Click Fetch Descriptor(s) to install the necessary solution descriptor onto the MVP server from the device.
5
Click Configure, and then adjust settings as needed.
Configuring the application
12