Instructions For Use - Baumatic B23 User Instructions

Instructions for use

These User Instructions should be retained for future reference and for use by any person who is
perhaps unfamiliar with the appliance.
USING THE HOB
The INDUCTION HEATING system quickly transfers the energy required to cook directly to the pan
and therefore the surface of the hob remains cool. The result is a fast, economical and precise
operation.
Cast Iron, Enameled Steel or Induction Stainless Steel pans can be used on these hobs but not pans that
are made from Glass, ceramic, non-magnetic stainless steel or aluminum 9 without a special magnetic
base).
Any pan that is not flat or is of poor quality and condition is not suitable for use with this product as it
can damage the ceramic surface.
When the appliance is switched on for the first time after being connected to the mains supply the
control panel will indicate:
For one second. If any other code or no code at all is indicated then there is a problem with the power
supply, the connections to the appliance terminal block, or the mains supply itself, in either case we
recommend that the electrical connections are check again.
Key-Lock Function
These models have a safety lock feature incorporated into the control panel
to prevent accidental use of the appliance, This can be done by first pressing the power On / Off key
and then the Lock Key, The lock function can also be applied to a cooking zone when in use, to
maintain a specific heat setting, this is done by selecting the required heat setting of the zone and then
by pressing the lock key it will lock the zone at that required setting. When applying the lock function
an audible bleep is emitted and the LED adjacent to the pad will illuminate. To switch off the lock
function press the Key symbol and again an audible bleep will be emitted and the adjacent LED will be
distinguished. To gain full adjustable heat control the zone must be re-selected.
Switching On and Selecting a Cooking Zone
To switch on the appliance press the On / Off pad for 3 seconds, an audible bleep will be emitted and
the adjacent neon light will illuminate. Also a zero illuminates in each power level display and the
adjacent neon indicators flash.
The next input selection must take place within 10 seconds otherwise the hob will switch off again.
You can now select the required cooking zone by pressing the appropriate zone identification key and
then selecting the required heat level using the
through to 9 maximum.
again be selected and
adjusted.
E -
0
0
+ -
or keys, The heat levels range from 1 minimum
To change the power level of a zone in use, that zone must
8
then using the + and – keys the power level can be
0 0
This feature is
0
0
8