Use And Maintenance; Touch Control User Instructions - Baumatic BSIH32-ANZ Instruction Manual

Use and Maintenance

Touch control user
instructions
CONTROL PANEL ELEMENTS (see fig. 4)
1
On/off sensor.
2
Hotplate indicators.
3
Power and/or residual heat indicators.
4 Reduce power sensor (less).
5 Increase power sensor (more).
Timer/Clock indicator.
6
Indicator of selected time (clock).
7
Locking sensor (for the rest of the sen-
8
sors, except on/off).
9 Indicator light of the induction element
with timer.
10
Pilot light for activated locking.
1 1
Time reduction sensor on clock (less).
Time increasing sensor on clock (more).
12
Countdown indicator
13
second) .
N.B.: * Only visible when in operation.
The sensors marked on the control panel
are used for control purposes.
There is no need to exert pressure on the
glass - you enable the function you requi-
re simply by touching the sensor with your
finger.
fig. 4
12
Each action is confirmed by a beep.
SWITCHING THE APPLIANCE ON
1 Touch the on sensor
one second. The Touch Control will acti-
vate, you will hear a beep and the indi-
cators will turn on. If any of the cooking
areas is hot, the corresponding indicator
will alternate between showing a
a
The following action must be carried out
within 10 seconds or the touch control will
automatically switch off.
When the touch control is activated, it can
be disconnected at any time by touching
the sensor
blocked (blocking function activated). The
(blinks each sensor
connecting the touch control.
SWITCHING THE HOTPLATES ON
The hotplates will be found deactivated,
with their respective power indicators (3)
at
the hotplates are set at
seconds to activate any of them, otherwise
the touch control will automatically turn off.
Use the sensors
.
0
(1), even if it has been
(1) always takes priority for dis-
, until a power level is selected. If all
0
and
(1) for at least
and
H
, you have 10
0
(4/5) to select
The aesthe-
tics of the
Touch Control
may vary
according the
model.