2) Then, the 1000Mbps and Link/Act LED indicators will flash
momentarily for one second, which represents a resetting of
the system.
Note
If the LED indicators don't respond as described above, please
check the power supply and its connection.
Chapter 3.
This Chapter describes the front panel, rear panel and LED indi-
cators of the Switch.
3.1 Front Panel
Figure 3-1 TL-SG1008P Switch Front Panel
The Switch's LEDs are located on the front panel.
Name
Status Indication
On
(green)
Power
Off
Identifying External Components
The Switch is powered on.
The Switch is powered off.
5