Rear Panel - TP-Link TL-SG1008P User Manual

Note
If all PoE PDs power consumption is >= 53W, a priority* will be
arranged among the PoE ports like port-1 = port-2 = port-3 >
port-4, then the system will cut off the power of the
lowest-priority port.
*Priority:

3.2 Rear Panel

Figure 3-2 TL-SG1008P Switch Rear Panel
The following parts are located on the rear panel:
¾ Power (48V): 48V indicates the input voltage of the power
adapter provided with this TL-SG1008P Switch. The Power
socket is where you will connect the power adapter.
This function will help protect the system when the
system power is overloaded. For example, Port 1, 2
and 4 is using 15.4W (maximum power for per port is
15.4W); the system power is 46.2W in total. If there is
an additional PD inserted to Port 3 with 10W, and
then the system will cut off the power of Port 4
because of the overloaded power, this means Port 1, 2
will use 15.4W, and Port3 will use 10W, no power
will be supplied to Port 4.
7