Power On; Chapter 3. Identifying External Components; Front Panel - TP-Link TL-SF1008P User Manual

2.2 Power On

The TL-SF1008P Switch can be used with DC power supply.
Powering on the Switch, it will automatically initialize and its LED
indicators will respond as follows:
1) All the LED indicators except PoE ports LED will light syn-
chronously at first,
(green), 100Mbps LED (green) and PoE MAX LED (red), will
light off at once, which indicates the system initialized well.
2) The Power indicator will light all the time.
Note
If the LED indicators don't respond as described above, please
check the power supply and its connection.
Chapter 3.
This Chapter describes the front panel, rear panel and LED indi-
cators of the Switch.

3.1 Front Panel

The Switch's LEDs are located on the front panel.
then all of them included Link/Act LED
Identifying External Components
Figure 3-1 TL-SF1008P Switch Front Panel
4