Initial System Configuration - 3Com 3C10122 - NBX Business Telephone Installation Manual

112 C 2: I
HAPTER NSTALLING
Table 24 Auto Discover Actions on NBX System Components (continued)
Component
Telephones
Analog Terminal Cards
Analog Terminal Adapters
NCP ATA port
3Com Attendant Console
pcXset
Soft Telephone
Initial System
Configuration
S H C
YSTEM ARDWARE OMPONENTS
Auto Discover Action
Gathers configuration information from the telephone, assigns a default User Profile
labeled "new user," assigns the next lowest available extension number to the
profile, and enters the information into the configuration database.
Auto Discover Telephones finds both Analog Terminal Cards and Analog Terminal
Adapters.
By default, the Auto Discover process assigns extension number 1000 (4-digit Dial
Plan) or 100 (3-digit Dial Plan) as the first telephone extension. You can use the NBX
NetSet utility to specify a new extension starting number. To simplify Auto Attendant
configuration, you should start a range at a base number, for example, 1000/100,
2000/200, 3000/300, or 4000/400. The default Auto Attendant assumes that
extension 1000 (4-digit dial plan) or 100 (3-digit dial plan) is the extension of a
human attendant (receptionist).
Finds and configures any installed 3Com Attendant Consoles. The first 100 existing
telephones, except for the extension that is associated with the Attendant Console,
are mapped to Attendant Console buttons. The lowest extension is automatically
associated with the Attendant Console. Typically, you would wait until you have
installed all your telephones before you enable Auto Discover Attendant Consoles.
Enables the Auto Discover feature on installations of the pcXset PC Telephone Client
when the following conditions are true:
The pcXset PC Soft Telephone program is running on the host PC.
■
The pcXset PC Soft Telephone host computer is connected to the network.
■
You have entered the proper license key into the NBX NetSet utility.
■
Before you use the Auto Discover process to configure telephones and
attendant consoles, you should review the procedures in
Telephones and Attendant
To use the Auto Discover feature for initial system configuration:
1 Log in to the NBX NetSet utility using the administrator username and
password.
2 Click
System-wide Settings > Enable Features System-wide.
3 Verify that the box labeled Extensions Start At is set to what you want,
and then click Apply.
For a 4-digit dial plan, extensions start by default at 1000. For a 3-digit
dial plan, extensions start at 100.
Do not specify a starting extension that begins with zero (0) as that will
cause the Auto Discover process to fail.
Consoles.
Chapter 3,