3Com Legacy Link Norstar Card - 3Com 3C10122 - NBX Business Telephone Installation Manual

3Com Legacy Link
Norstar Card
information on the number of Legacy Link cards supported by an NBX
system.
The maximum loop length is 1000ft (300m).
■
Handsets connected to the card can be configured through the Button
■
Mappings page of the NBX NetSet utility. You can configure each
phone individually, but 3Com recommends that you use the
Telephone Groups option within the NBX NetSet utility to define a
group with specific button mappings for each telephone type, which
can then be used for any number of phones.
The Meridian Handset Overview document is available from the 3Com
■
web site.
Quick reference cards are supplied with the 3Com Legacy Link for
■
Meridian card. Please replace the existing Meridian Quick Reference
Cards (situated under the handset on the Meridian phone) with the
new 3Com IP Gateway Quick Reference Cards provided.
Templates for Meridian Key Cap Labels and Meridian Phone Quick
■
Reference Cards can be obtained at www.desi.com.
The 3Com Legacy Link cards do not support compression. Voice traffic
■
between a legacy handset and an NBX device that supports
compression will be uncompressed.
The supported Meridian handsets are the M2006, M2008, M2616,
■
M3110, M3310, M3820, M3901, M3902, M3903, and M3804.
When connected to the card, the Meridian handset reflects the
■
features and functionality of the NBX Business Telephone. For details
of specific phone model features and capabilities, see the Legacy Link
for Meridian Handset Compatibility and Overview.
The Meridian phones are line-powered from the card through an
■
external power source. No additional phone power is required.
The 3Com Legacy Link for Norstar card enables the an NBX system to
support legacy Nortel Norstar handsets. Each Legacy Link for Norstar card
supports up to 16 handsets. The card connects to the Norstar handsets
using the existing telephone wiring, punchdown blocks, and connectors.
Legacy Link Norstar Card Installation Notes
Legacy Link Cards require NBX system software version R4.1.6 or
■
higher.
3Com Legacy Link Analog Card 165