Servicing The Network Call Processor Battery; Getting Service And Support - 3Com 3C10122 - NBX Business Telephone Installation Manual

Servicing the
Network Call
Processor Battery
Getting Service and
Support
4 Configure the connection to use the serial port to which you connected
the cable and to use the settings in
Table 38 Terminal Emulation Program Properties
Property
Emulation
Baud Rate
Data bits
Parity
Stop bits
Flow control
All messages that associated with the board (for example, the
initialization process) appear in the terminal emulation window.
CLI Commands
The command
nbxIpConfig
address settings required by the NCP and other NBX devices. For any
other purpose, 3Com recommends that you use the command line
interface only under the direction of an authorized service technician.
If you lose the system date and time when you reboot an NBX system, it
could mean that the NCP battery must be replaced. The battery is not a
user-serviceable item. If you suspect a problem with the battery, contact
your 3Com Technical Support representative.
WARNING: There is a danger of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent type recommended
by the manufacturer. Dispose of used batteries according to the
manufacturer's instructions.
Your authorized 3Com NBX Voice-Authorized Partner can assist you with
all of your support needs, including systems and cable plant design,
installation, configuration, and project management.
A choice of maintenance services, including remote diagnostics, on-site
support, telephone technical support, and hardware replacement, is
available from your 3Com NBX Voice-Authorized Partner. Training and
enhancement services are also available.

Servicing the Network Call Processor Battery

Table 38.
Value
VT100
9600
8
None
1
None
provides a simple way to set the static IP
197