The Network Settings Dialog; The Ip Address Tab - HP Neoware e370 - Thin Client User Manual

The Network Settings Dialog

The IP Address Tab

Network Settings
The
which are accessed by clicking on the tab titles along the top. The
following sections describe the options available on each tab.
Obtain an IP address via DHCP
Default: Selected
When DHCP is enabled, the thin client will rely on a remote DHCP
configuration service to supply the required settings. These settings
are then saved in the thin client. At the next client bootup, if the
client cannot reach the DHCP server, the client will connect to the
network using the saved network information provided that the
initial lease time has not expired.
Specify an IP address
Default: Not Selected
Selecting this option will disable remote network configuration and
cause the thin client to use the network settings specified in the
following dialog options. You will need to ask your network
administrator for the entries required.
dialog consists of three tabs of setup options
The Network Settings Dialog
Network Configuration
41