HP Neoware e370 - Thin Client User Manual page 94

TeemTalk Connection Configuration
78 Terminal Emulation Selection
TA6530 Provides compatibility with software designed to
drive the Tandem 6530 terminal.
TVI 910, TVI 920 and TVI 925
Provide compatibility with software designed to
drive the TeleVideo 910+, 920 and 925 terminals,
respectively, as emulated by the Wyse WY-50/50+/
60 terminals.
TVI 950 and TVI 955
Provide compatibility with software designed to
drive the TeleVideo 950 and 955 terminals, respec-
tively.
Unisys T27 Provides compatibility with software designed to
drive the Unisys T27 terminal.
Viewdata 40, Viewdata 80 and Viewdata Split
These enable access to a viewdata service using one
of three display formats.
VT PCTerm Provides compatibility with software designed for
the PC Term mode supported by DEC.
VT52 and VT100
These emulations enable you to run applications
written for the DEC VT52 and VT100 terminals,
respectively.
VT500 7-Bit and VT500 8-Bit
These emulations enable you to run applications
written for the DEC VT320 terminal, the difference
is in their treatment of 8-bit control codes. When
VT500 7-Bit is selected, all 8-bit codes are con-
verted to their 7-bit equivalents, whereas VT500 8-
Bit leaves 8-bit codes unchanged. If you are using
VT200 applications, select VT500 7-Bit.