Port Configuration
The Serial Tab
164
The Serial Tab
Baud Rate
Default: 9600
This specifies the transmit and receive baud rate.
Data Bits
Default: 8
This specifies the number of data bits sent for each character that is
transmitted.
Parity
Default: None
This specifies the parity mode for each transmitted character. If the
Databits
number of
is 8, set this option to None.
Selecting Odd will cause an eighth bit to be added with a value of 1
if the previous 7 bits add up to an even number, and 0 if the previous
7 bits add up to an odd number. Selecting Even will cause an eighth
bit to be added with a value of 1 if the previous 7 bits add up to an
odd number, and 0 if the previous 7 bits add up to an even number.
Mark parity will set every eighth bit to 1 and Space parity every bit
to 0.