Dial-Up Ppp Connection Configuration; Introduction - HP Neoware e370 - Thin Client User Manual

Introduction

Dial-Up PPP
CHAPTER 10
Connection
Configuration
This chapter describes how to create a Neoware Dial-Up PPP
connection and explains the configuration options available.
This manual is intended to cover a number of Neoware thin client
models. Depending on the software version included with your thin
client, it may not have the Neoware Dial-Up PPP client installed.
PPP/RAS (Point-to-Point Protocol / Remote Access Server) is the
Internet Standard for the transmission of network packets over dial-
up connections. Once a PPP/RAS connection has been established,
a user can then run RDP, ICA, Internet Explorer or terminal emula-
tion server sessions.
This chapter describes how to create a new Dial-Up PPP connec-
tion, then proceeds to explain all the configuration options avail-
able. For details on how to start a Dial-Up PPP connection, refer to
the section "Starting a Connection" on page 18.
Windows CE Thin Client User Manual
109