HP Compaq MultiSeat ms6000 Troubleshooting Manual page 59

Troubleshooting guide hp compaq multiseat ms6000 desktop

Hide thumbs Also See for Compaq MultiSeat ms6000:

Table of Contents

Locate, press, and hold the CMOS button in for five seconds.

NOTE:

button will not clear CMOS if the power cord is connected.

Figure B-1

NOTE:

Illustrated Parts & Service Map (IPSM) for that particular system.

Replace the computer cover or access panel.

Reconnect the external devices.

Plug in the computer and turn on power.

NOTE:

that configuration changes have occurred. Use Computer Setup to reset any special system setups

along with the date and time.

For instructions on Computer Setup, see the Computer Setup (F10) Utility Guide.

ENWW

Make sure you have disconnected the AC power cord from the wall outlet. The CMOS

CMOS button

For assistance locating the CMOS button and other system board components, see the

You will receive POST error messages after clearing CMOS and rebooting advising you

Clearing and Resetting the CMOS

Table of Contents

Troubleshooting

Do you have a question about the Compaq MultiSeat ms6000 and is the answer not in the manual?